50mm diameter general purpose dry pressure gauge for the measurement of fluid liquids that are not highly viscous, high temperature (over 60°C), likely to solidify / crystallize, or corrosive to copper or tin alloys. Also suitable for gases (excluding oxygen or acetylene) up to 25 bar maximum.
For use in: Pneumatics, Air Compressors, HVAC Industry, Water Industry
Nominal Size: 50mm
Accuracy: +/- 2.5% FSD
Scales:
PSI Outer (Black) & BAR Inner (Red) – Pressure
“HG Outer (Black) & BAR Inner (Red) – Vacuum
Ranges: -30/0”HG Vacuum to 0/400 PSI Pressure
Mounting Options:
Bottom – Direct Mounting Only (standard)
Centre Back – Direct Mounting Only (standard)
Operating Temperature:
Medium: +60ºC maximum
Temperature Effect:
Variation in indication caused by temperature
± 0.04 x (t2 – t1)% of the span
t1 is the reference ambient temperature in ºC
t2 is the ambient temperature in ºC
Ingress Protection: IP 40 as per EN 60529
Window: Acrylic – Crystal clear, push-fit
Pressure Element:
CU Alloy – Sealed Bourdon tube C-Type
Joints: Soldered with tin alloy
Movement: High Precision Brass
Residential Property
Healthcare